Here is the OBD device compatible and recommended for your Citroen BERLINGO III (2018 - ...)

The technical specifications of your Citroen BERLINGO III (2018 - ...)

Here is a selection of models diagnosed by our customers using the klavkarr 210 diagnostic scanner on your Citroen. Please note that this list is not exhaustive. Even if your model is not listed, we assure you that the scanner is compatible, allowing you to read and clear fault codes from your car.

Engine	Year	Fuel	P	Compatible scanner
1.2 PureTech Protocole : CAN 11bit 500kb	2018	Gasoline	110	To the car scanner Citroen BERLINGO III

OBD2 Car Scanner and software

Based in Brittany, France, we specialise in electronic car diagnostics. We've been working on fault diagnostics and OBD diagnostic ports since 2009.

On-board electronics started appearing in vehicles in the early 2000s. It has since become essential to scan vehicle ECUs to retrieve engine fault information, particularly OBD2 fault codes. Our goal is to make these car scanners — usually reserved for professionals — accessible to private users, allowing them to identify faults and electronic error codes in their own vehicles.

With our klavkarr car scanners (100% Made in France) and our EOBD Facile software and mobile apps, we hope you'll be able to fix electronic issues yourself, without relying on your dealership’s diagnostic tool. Our solution is plug & play and very easy to use.

100% Made in France

To run a fault diagnosis, simply connect our klavkarr car scanner to your vehicle’s OBD port, start a scan using our EOBD Facile software, clear the amber engine warning light and remove the error code.

With every klavkarr order, you can choose to run your car's OBD diagnostic either with a Windows laptop / MacBook or with your Android smartphone or iPhone (iOS). Our EOBD-Facile software works across all devices.

If you'd like to learn more about the OBD (On-Board Diagnostics) standard, check out our blog and join our community of over 100,000 users!

Why is the AdBlue Warning Light Still On After Refilling in Your Citroen BERLINGO III?

If the AdBlue warning light stays on after refilling your Citroen BERLINGO III, it could be due to a sensor that hasn’t yet detected the refill, a fault in the AdBlue injection system, or an electronic issue.

Sometimes, the ECU takes a few dozen miles to update the information. In other cases, you may need to reset the system using a diagnostic tool or check the quality of the fluid added.

See the specific procedure for resetting the AdBlue warning that stays on after refill in your Citroen BERLINGO III.

How to Reset the Oil Change Warning in a Citroen BERLINGO III

You can reset the oil service light in your Citroen BERLINGO III using a tool like klavkarr. This car scanner, when used with its dedicated app, allows access to the vehicle's ECU to reset the maintenance indicator after an oil change.

A simple solution to avoid having the warning light stay on unnecessarily.

Why is the engine fault light on in your Citroen?

The engine fault light is a dashboard warning light that is part of your Citroen BERLINGO III car alert system . It illuminates to signal a potential issue with the engine.

But what exactly is an engine fault?

It can range from minor issues that don't prevent you from driving to more serious malfunctions that can affect engine performance or, in the worst case, cause irreversible damage.

If you're wondering Whether you can keep driving with the amber engine warning light on, we invite you to read our full article on the topic.

What should you do if a warning light comes on in your Citroen BERLINGO III

If you encounter an engine fault or other issues (airbag, abs, esp, etc.), our advice would be to act cautiously and find out the root of the problem causing the light to illuminate. You can diagnose the fault with a diagnostic tool compatible with your Citroen to learn more about this issue.